欢迎访问上海灿升电子有限公司官方网站!

产品中心




上海灿升电子有限公司(MegaPower Electronics(Shanghai)CO.,Ltd)成立于2003年,是全球熔断器厂家Bussmann的代理商。旨在为用户提供专业的过电流保护产品和解决方案。
EV FUSE 500VDC 50-400A
    发布时间: 2023-09-11 13:21    

re-production and sample electric vehicle power fuses — 500 Vdc, 50-400 A

  

Fuse size/ratings

  • 20 mm diameter, 50-150 A

  • 25 mm diameter, 100-250 A

  • 30 mm diameter, 200-400 A


Description

  • Eaton’s BussmannTM series Electric Vehicle (EV) fuses for protecting high power battery charging and management systems up to 500 Vdc in ratings from 50 to 400 amps.


Specifications:

  • Ratings

  • Volts - 500 Vdc

  • Amps – 50-400 A

  • Interrupting rating

    • Max DC – 20 kA

    • Min DC 200%

Fuse ratings


* For system parameters below 500 Vdc and 20 kA, see clearing I2t correction factors on page 9.

**50 percent of fuse label amp rating tested at 23°C ± 2°C.


Dimensions† — mm




  • Agency information

    • Designed to:

      • JASO D622

      • ISO 8820-8

    • Manufactured under a IATF 16949 quality system for compliance with automotive requirements

    • RoHS compliant

    • REACH declaration available upon request


    Features

    • • Higher voltage rating provides overall system efficiency using smaller, more economical conductors while meeting the needs of higher voltage battery packs

      • Higher interrupting rating protects high capacity battery packs needed for vehicle acceleration and range requirements

      • Up to ten times faster opening under high fault current conditions helps assure reliable protection of circuits and components

      • Requires up to 48% less space than conventional high speed fuses to help reduce space and weight

      • Data logging system marks each fuse with a serial number and date code for traceability of Critical to Quality characteristics

      • To help project the life of the fuse in your application, unique driving profiles and conditions can be simulated to verify proper fuse size and performance under a wide range of driving behaviors

      • Operation as low as 200% overload provides back up protection to the battery management system

      • Can be applied in parallel to realize greater ampacity within sizing guidelines

    Available pre-production and sample catalog numbers



    * Pre-production fuses sold in non-breakable quantities for these case sizes: 20 mm - 250 fuses, 25 mm - 100 fuses, 30 mm - 100 fuses.

    **Sample fuses sold in non-breakable quantities of four fuses.

    To order pre-production or sample fuses, contact Bussmann Customer Service

    Phone: 855-BUSSMANN (855-287-7626) M—F, 7:00 a.m. — 6:00 p.m., Central time

    Email: BussCustSat@Eaton.com

    For information on production fuses, contact your local Bussmann product sales representative.


                                20 mm diameter DC minimum melt / maximum clearing time-current curves — multiple of rated current

                                For 50 to 100 amp fuses supplied via DC rectifier @ 500 Vdc and time constant (L/R) 2 ms ± 0.5 ms


                          20 mm diameter DC minimum melt / maximum clearing time-current curves — multiple of rated current

                          For 125 to 150 amp fuses supplied via DC rectifier @ 500 Vdc and time constant (L/R) 2 ms ± 0.5 ms


                       25 mm diameter DC minimum melt / maximum clearing time-current curves — multiple of rated current

                       For 100 to 150 amp fuses supplied via DC rectifier @ 500 Vdc and time constant (L/R) 2 ms ± 0.5 ms


                     25 mm diameter DC minimum melt / maximum clearing time-current curves — multiple of rated current

                     For 175 to 250 amp fuses supplied via DC rectifier @ 500 Vdc and time constant (L/R) 2 ms ± 0.5 ms


                                30 mm diameter DC minimum melt / maximum clearing time-current curves — multiple of rated current

                                For 200 to 400 amp fuses supplied via DC rectifier @ 500 Vdc and time constant (L/R) 2 ms ± 0.5 ms


                             Power loss correction factors

                                 Melting time correction factors (tolerance band)*


                                       Clearing I2t correction factors — 5 to 10 kA and 20 kA

                                                * Correction factor applies to I2t clearing at 20 kA in the catalog number table on page 2.





合作咨询



  • 标题
  • 电话*
  • 邮箱
  • 留言内容
提交